Aqua PRO ECO550 설치 및 사용자 설명서 - 페이지 15

{카테고리_이름} Aqua PRO ECO550에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua PRO ECO550 20 페이지. Swimming pool heat pump
Aqua PRO ECO550에 대해서도 마찬가지입니다: 설치 및 사용자 설명서 (20 페이지)

페이지 인쇄

and grounding connection;

C. Make sure that the main heater power switch is off;

D. Check the temperature setting;

E. Check the air inlet and outlet.

Trial

A. The user must Start the water pump before the heat pump, and

turn off the heat pump before the water pump, or the heat pump will

be damaged;

B. The user should start the water pump, and check for any leakage

of water; Power on and press the ON/OFF bottom of the heat

pump, and set suitable temperature in the thermostat.

C. In order to protect the pool heat pump, the heater is equipped with

a time lag starting function, when starting the heater; the blower will

run 1 minute earlier than the compressor;

D. After the pool heat pump starts up, check for any abnormal noise

from the heater.

VIII.

Precautions

１. Attention

A. Set proper temperature in order to get comfortable water

temperature; to avoid overheating;

B. Please don't stack substances that can block air flow near inlet or

outlet area, or the efficiency of the heater will be reduced or even

stopped;

C. Please don't put hands into outlet of the swimming pool heater,

and don't remove the screen of the fan at any time;

D. If there are abnormal conditions such as noise, smell, smoke and

electrical leakage, please switch off the machine immediately and

contact the local dealer. Don't try to repair it yourself;

E. Don't use or stock combustible gas or liquid such as thinners,

paint and fuel to avoid fire;

F. In order to optimize the heating effect, please install heat