AVProConnect AC-EX70-UHD 사용자 설명서 - 페이지 6

{카테고리_이름} AVProConnect AC-EX70-UHD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AVProConnect AC-EX70-UHD 12 페이지. 4k hdmi 2.0 extender with hdcp 2.2
AVProConnect AC-EX70-UHD에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용자 설명서 (12 페이지)

페이지 인쇄

AC-EX70-UHD

What's In The Box?

■

① Transmitter Unit P/N_ AC-EX70-UHD-TX.

② Receiver Unit P/N_ AC-EX70-UHD-RX.

③ Operating instructions.

④ 48V DC Power Supply P/N_VDC4805. (In scope of supply only single PS for

TX, as RX should be powered from TX to create functional transmission line)

⑤ 1 x IR TX unit (IR emitter cable, for TX or for RX)

⑥ 1 x IR RX unit (IR receiver cable, for TX or for RX)

⑦ 3.5mm stereo plug to male DB9 for connecting RS232 to device serial port.

⑧ 3.5mm stereo plug to female DB9 for connecting RS232 to PC.

 NOTE:

PART NUMBER (Abbreviation as P/N)

Connections and Operations

■

1) Connect the HDMI input source (

STB, UHD/HD Media Players etc.) to AC-EX70-UHD-TX.

2) Connect a CAT-5E/6A cable from UTP/STP output of

UTP input of AC-EX70-UHD-RX.

3) Connect the HDMI sink (

AC-EX70-UHD-RX.

4) Connect an IR Receiver or Emitter into

5) Connect an IR Receiver or Emitter into AC-EX70-UHD-RX.

6) Stereo jack 3.5mm acting as RS232 Port can be set for firmware update

(Program) or RS232 control signal transmission (Normal)

for RS232 Control-Normal).

Attention:



such as UHD TV, HD-LCD、HD / UHD-DLP）to

Please insert and extract HDMI cables with care.

such as UHD Blu Ray, HD/ DVD、PS3、

AC-EX70-UHD-TX

Default is set