Allied Telesis AT-8948 빠른 설치 매뉴얼 - 페이지 7

{카테고리_이름} Allied Telesis AT-8948에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-8948 13 페이지. At-8900 series
Allied Telesis AT-8948에 대해서도 마찬가지입니다: 데이터시트 (4 페이지), 데이터시트 (3 페이지), 데이터시트 (3 페이지), 데이터시트 (2 페이지), 데이터시트 (5 페이지), 개요 (1 페이지), 구성 방법 (9 페이지), 브로셔 (8 페이지), 보충 설명서 (6 페이지)

Allied Telesis AT-8948 빠른 설치 매뉴얼
Quick Install Guide
C613-04048-01 REV B
To install the switch using the wall-mount kit:
Ensure that there is sufficient space on the wall for the switch and its
associated cables.
Note that the wall-mount kit is designed to hold the switch against the
wall with the front and back of the switch vertical.
Remove the rubber feet from the switch.
Screw the brackets to the sides of the switch using the supplied M4
screws (see Figure 2).
Locate the position on the wall where the switch will be mounted.
Locate and mark the position on the wall where the top wall-mount
brackets will be fixed.
The top wall-mount brackets are fixed to the wall through the wall
anchor slot (see Figure 2).
Make sure that the positions you have marked on the wall are the
correct distance apart and are horizontal.
Fix two wall anchors in the wall, one for each bracket.
Hang the switch from these anchors.
Fix additional wall anchors through the bottom wall-mount brackets, 2
per bracket.
Ensure that all wall anchors are tightened sufficiently to secure the
switch firmly against the wall.
Figure 2: Fitting wall-mount brackets on the switch
Bracket
A
B
A
B
Bracket
A
Switch
Key:
A
screw
B
wall anchor slot
7
A
8900WM