AVProConnect AC-MXMV122-UHD 사용자 설명서 - 페이지 7

{카테고리_이름} AVProConnect AC-MXMV122-UHD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AVProConnect AC-MXMV122-UHD 20 페이지. Video flux

AC-MXMV122-UHD

Controlling the AC-MXMV122-UHD

Front:

To select the input for the desired output port:

Press any IN1, IN2, IN3 or IN4 button will seamlessly change the source of Output 1 or Output 2 to the

selected input.

To select source type for the input groups:

Press HDMI or VGA or YPbPr or AV and then press the input button IN1, IN2, IN3 or IN4, and the input group

will change the input to the selected HDMI or VGA or YPbPr or AV (CVBS) input.

Use the 2K QV button to set the desired output port to output 1080P quad-view, or use the 4K QV button to

set both outputs to 4K quad-view on a 4K screen.

The 4 buttons (A, B, C, D) set both outputs to multi-viewer mode, with both displays showing the same image.

These 4 buttons set the AC-MXMV122-UHD to output one main picture with the other three inputs shown in

PIP mode. Repeated presses of the same button cycles the main and PIP images through the four inputs.

The AC-MXMV122-UHD can be cascaded to create a larger system such as an N input seamless switcher, Nx2 seamless

matrix or MxN Multiviewer. The RS232 control signals can also be cascaded by using an RS232 cable from the pass

through RS232 port to the RS232 input port of the next AC-MXMV122-UHD. When more than one AC-MXMV122-UHD

connected in a cascaded RS232 control chain, each AC-MXMV122-UHD must have unique (different) Serial

Communication address.

Each address can have a binding note, which has at most 10 characters. After the address table is saved, they can be

selected using the address selection on main menu for control and management.

AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~

pg. 7