Allied Telesis AT-9816GB V2 빠른 설치 매뉴얼 - 페이지 9
{카테고리_이름} Allied Telesis AT-9816GB V2에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-9816GB V2 10 페이지. At-9800 series switch
페이지 인쇄
Quick Install Guide
C613-04038-01 REV H
System LEDs
The following LEDs report operations and faults on AT-9800 Series switches
(Table
1).
Table 1: System LEDs on AT-9800 Series switches
LED
State
PWR
Green
(Power)
Fault
Red
1 Flash
2 Flashes
3 Flashes
4 Flashes
5 Flashes
6 Flashes
RPS (Redundant
Green
Power Supply)
CompactFlash
Green
Activity
(Rear panel)
The AT-9800 Series Switch Hardware Reference has further troubleshooting
information, including information on switch port LEDs.
Function
The switch is receiving power
The switch or management software is malfunctioning
A switch fan has failed or is operating below the
recommended speed
If RPS monitoring is enabled, an RPS fan has failed or is
operating below the recommended speed
If an RPS is connected, the switch's PSU (Power Supply
Unit) has failed
If RPS monitoring is enabled, the RPS PSU has failed
If RPS monitoring is enabled, an RPS is not connected or
is not operational
The switch's temperature has exceeded the
recommended threshold
An RPS is connected to the switch and is receiving
power
The compact flash memory is active. Do not eject the
flash memory module
9