DFI VC70B-KU 설치 매뉴얼 - 페이지 4

{카테고리_이름} DFI VC70B-KU에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFI VC70B-KU 6 페이지.

Installing a Mini PCIe Card

The system board is equipped with 2 Mini PCIe slots: one full-size and one half-

size slot. Here we will demonstrate the installation of a full-size Mini PCIe card.

The Mini PCIe sockets are located on the main board; to access the main board,

detach the power board on top of it. Remove the screws that affix the front bezel

as shown in the following pictures to access the power board and uninstall it from

the system.

2. Push the Mini PCIe card down and use the provided mounting screws to se-

cure the card on the system board.

Mounting screw

Notes:

The system also has a half-size Mini PCIe slot that can accommodate either a Mini PCIe or an

mSATA card. Refer to jumper settings for signal selection for this slot.

The power board connects to the mainboard with a 4-pin power cable, please reconnect this cable

if it is removed during installation.

Screw

Power cable