DFI KS-SD Series 설치 매뉴얼 - 페이지 4

{카테고리_이름} DFI KS-SD Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFI KS-SD Series 17 페이지.

Installing a SATA Drive

The system can accommodate one SATA drive. Please use the following

procedure to install a SATA drive in the system.

1. Before installing the SATA drive, connect the SATA data/power cable

to the SATA data connector of the SATA drive. Then install the SATA

drive onto the HDD bracket with the provided mounting screws.

Mounting Screws

2. Place the SATA drive installed with the HDD bracket in the system.

Align the mounting holes on the HDD bracket with the mounting holes

on the drive bay and use the provided mounting screws to secure the

drive in place.

Mounting Screws

Mounting screws

SATA data and power cable