DFI KS070-ALE39P 설치 매뉴얼 - 페이지 5

{카테고리_이름} DFI KS070-ALE39P에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFI KS070-ALE39P 12 페이지.

Installing an M.2 Card

The system is equipped with one M.2 socket, supporting the M.2 22x42mm

(key B) form factor. Use the following procedure to install an M.2 card:

1. Align the notch at the edge of the M.2 card with the key in the connector.

2. Insert the M.2 card into the connector.

3. Push down on the other end of the M.2 card and secure and card on the

mainboard with the provided mounting screw.

Note:

The M.2 socket supports PCIe, USB, and SATA signals and can accommodate common

mobile broadband and storage modules. For jumper settings on switching the signal

betwen SATA and PCIe, refer to "Board Layout and Jumper Settings."

Mounting screw

M.2 card