AVR Cinema Mirror HC 37.53 설치 지침 및 팁

{카테고리_이름} AVR Cinema Mirror HC 37.53에 대한 설치 지침 및 팁을 온라인으로 검색하거나 PDF를 다운로드하세요. AVR Cinema Mirror HC 37.53 9 페이지.

CONSIDERATIONS

Cinema Mirror is an active optic set to be

installed in false ceilings hiding the

projection equipment, and that through

a pulsation it opens a floodgate of

335x335 mm., allowing the projection of

the image, thanks to its two mirrors,

without causing the trapeze effect on the

image. For that, Cinema Mirror and the

screen must be in the same plane or with

a difference from 0 to 12 cm. (Fig. 1).

Always be sure to perpendicularly set the

projected light with the projection screen,

any difference may negatively affect the

image (Fig. 2).

The optic mirrors of this equipment are

protected by a plastic film to avoid

accidents. Remove this film when it is

indicated by this manual.

Do not do so beforehand.

INSTRUCTIONS AND TIPS FOR THE INSTALLATION

OF THE HC 37.53 MODEL CINEMA MIRROR

GENERAL RECOMMENDATIONS FOR ASSEMBLY AND INSTALLATION

figure 1

figure 2

d = projector's focal – 20 cm.

x = y