CPE 100361 소유자 매뉴얼 - 페이지 10

{카테고리_이름} CPE 100361에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CPE 100361 14 페이지. Detachable

ASSEMBLY

Crank Assembly

1 . Assemble the crank on to the hose reel as shown .

2 . Secure with the crank screw .

1 . Inspect threaded female connector on hose reel,

confirm that rubber O-ring is properly seated .

2 . Connect threaded male connector end of leader hose

to threaded female fitting on hose reel spool .

3 . Tighten by hand until snug (clockwise) .

4 . With adjustable pliers or wrench tighten fully .

nOTICE

Freezing temperatures can damage your hose

and watering accessories . Always disconnect the

connector hose and drain the water from the hose

prior to freezing conditions .

nOTICE

Prior to removing the hose reel for winter or moving

the hose reel to a new location, always disconnect

the connector hose and drain the water from the

hoses before storing or moving .

To remove hose reel from wall cradle:

1 . Turn off water at house water spicket .

2 . Unscrew leader hose from water spicket (leader hose

connects the hose reel to the house spicket) .

3 . Unwind hose from hose reel .

4 . Unscrew garden hose from hose reel .

5 . Unlatch two lower clips .

6 . Lift hose reel upward and out to remove from cradle

system .

For re-installation, follow instructions in reverse .

100361

ENGLISH