CPE C114 매뉴얼 - 페이지 12

{카테고리_이름} CPE C114에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CPE C114 19 페이지. Portable pump

7. VFD DIGITAL SPEED CONTROL

CPE Systems Inc.

• Protection level of IP66 (NEMA 4X) with indoor and outdoor approval; hose-proof,

dust-tight, and approved for use in rough environments.

• First decentral drive in the market with IO-Link Device Interface.

• Sensorless vector control for synchronous motors.

• Intuitive user interface for fast setup and easy navigation by parameter structure.

• Onboard display with built-in diagnostics.

• Micro USB interface for programming and diagnostics.

• Multiple digital and analog inputs for remote control and safety interlocks.

• Compatible with our wireless remote controls, pressure switches and run-dry

protection.

• Full onboard PID programming for interfacing with flow meters, level controls,

pressure sensors, and can/bottle fillers.

• Optional front-mounted potentiometer (speed control knob).

• IO-Link compatible.

Note: Your drive has been programmed with the correct settings for optimal performance.

Do not change the parameter settings without contacting the manufacturer. This will void

the warranty.

Degree of protection:

• IP66 (EN 60529)

• NEMA type 4X outdoor NEMA 250)

• UL type 4X outdoor (UL 50E)

Insulation resistance:

• Overvoltage category III (EN61800-5-1) - 0 ... 2000 m amsl

• Overvoltage category II (EN61800-5-1) - Over 2000 m amsl

Isolation of control circuits:

• Safe mains isolation via double/reinforced insulation (EN 61800-5-1)

Protective measures against:

• Short circuit

• Earth fault - earth-fault protected depending on operating status

• Overtemperature of motor - PTC or thermal contact

• Overvoltage

• Motor Stalling

Leakage Current: >3.5 mA AC, >10 mA DC (EN 1800-5-1)

Starting Current: ≤ 3 x rated mains current

www.cpesystems.com

+1 800 668 2268