CPE C328 매뉴얼 - 페이지 11

{카테고리_이름} CPE C328에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CPE C328 19 페이지. Portable pump

CPE Systems Inc.

3. At a location behind the backplate, scribe a mark on the shaft. See figures below.

4. Remove casing clamp, casing, and backplate.

5. Slide the drive collar onto the shaft.

6. Locate drive collar in relation to the scribe mark as shown in dimension A and secure

to the shaft with the set screws. Drive collar location is critical.

Model

"A" Dimension

C114

1 1/32" (2.3 mm)

C216

1 1/32" (2.3 mm)

C218

1 1/32" (2.3 mm)

C328

1 1/32" (2.3 mm)

C4410

1 1/32" (2.3 mm)

7. Install the seal spring, seal cups, seal o-ring, and carbon onto the shaft.

www.cpesystems.com

+1 800 668 2268