CPE C4410 매뉴얼 - 페이지 5
{카테고리_이름} CPE C4410에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CPE C4410 19 페이지. Portable pump
페이지 인쇄
CPE Systems Inc.
|
3.2 Drive Operation
Start-up procedure - Your variable frequency drive has been programmed and all the
connections have been completed. To start the drive, press the run button
key
(or potentiometer, if so equipped) to achieve the desired speed. Use the up button
and the down button
.
Table 1: Keypad Guide
Key
Actuation
Shortly
Shortly
Shortly
More than 3 s
Shortly
Shortly
Shortly
Shortly
www.cpesystems.com
to adjust the speed. To stop the pump, press the stop button
Condition
Local keypad control active
Display "LOC"
Remote control active
Display "REM"
Display "KSTOP"
No jog operation
Operating mode
None (anytime possible)
During operation
Manual setpoint selection via
keypad active
Display "MAN"
Operating mode
Local keypad control active
Display "LOC"
|
+1 800 668 2268
and use the up
Action
Run Motor
Deactivate keypad triggered stop
The motor remains at standstill
Display changes from"KSTOP" to"STOP"
Stop motor
Display "KSTOP"
Change to parameterization mode
>keypad parameterization mode
Save parameter settings in the user
memory of the memory module
Scroll through information in the above
status line
Change frequency setpoint
Activate full keypad control
Display "ON?"→ Confirm with
Control and setpoint selection can now
only be carried out via keypad
Renewed clicking: Exit full keypad control
Display "OFF?" → confirm with
Reversal of rotation direction
Display "REV?"→ Confirm with
|
5