AVS Ventshade 설치 지침 매뉴얼

{카테고리_이름} AVS Ventshade에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVS Ventshade 10 페이지. Deflector
AVS Ventshade에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (6 페이지)

페이지 인쇄

For proper installation and best possible fit, please read all instructions BEFORE you begin.

For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.

Important Safety Information

• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.

• Do not use automatic "brush-style" car washes.

• Do not use cleaning solvents of any kind.

• Periodically check all components for tightness.

Contents - 2 Piece Set

Front Driver

Side Visor

Contents - 4 Piece Set

Front Driver

Side Visor

Tools Required

Car Wash Supplies

Preparation Before Painting / Installation

• A trial fit is recommended to ensure proper positioning and fit.

• Check fit of parts before painting as we will not accept the return of modified or painted parts.

• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.

Installation Steps

Lower window. Use a putty knife to grasp and pull down the rubber window channel. Clean the inside of the window

rubber window channel

Installation Instructions

Ventshade

Front Passenger

Side Visor

Rear Passenger's

Front Passenger

Side Visor

Clean Towel

Phillips Screwdriver

NOTE: Actual application may vary slightly from illustrations.

channel with an alcohol pad.

Without Post

Deflector

TapeTabs x10

Rear Driver's

Visor

Tape Tabs x18

Visor

Putty Knife

rubber window channel

Page 1 of 3

I - Sheet Number VS04 Rev.A

Alcohol Pad x2

Alcohol Pad x4

Screws x2

Punch

Drill

With Post