AVS Ventvisor 설치 지침 매뉴얼

{카테고리_이름} AVS Ventvisor에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVS Ventvisor 12 페이지. Deflector
AVS Ventvisor에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (13 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (10 페이지)

For proper installation and best possible fit, please read all instructions BEFORE you begin.

For technical assistance or to obtain missing parts, please call Customer Service at 800-241-7219

Important Safety Information

• CAUTION - Before driving, ensure that the vent visors are properly secured to vehicle.

• Do not use automatic "brush-style" car washes.

• Do not use cleaning solvents of any kind.

• Periodically check all components for tightness.

• When using Surface Prep, avoid contact with skin. Use in well ventilated area. If contact is made with

material, flush area with large amounts of water. If irritation persists, get immediate medical

attention. USE PREP ON RUBBER ONLY

Contents - 2 Piece Set

Front Driver

Visor

Contents - 4 Piece Set

Front Driver

Front Passenger

Visor

Tools Required

Some parts require trimming excess tape along the window trim, see steps 11-12.

Preparation Before Painting / Installation

• Please review your warranty card BEFORE installation of this product.

• A trial fit is recommended to ensure proper positioning and fit.

• Check fit of parts before painting as we will not accept the return of modified or painted parts.

• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.

Installation Instructions

Ventvisor

Front Passenger

Visor

Rear Driver's

Visor

Rear Passenger's

Visor

Utility Knife

Deflector

Alcohol Pad x2

Alcohol Pad x4

Safety Gloves

Page 1 of 4

I - Sheet Number VV35 Rev.A

Surface Prep

Flange Clip x2

Pad x2

Surface Prep

Flange Clip x4

Pad x2