DFI GHF51 사용자 설명서 - 페이지 14

{카테고리_이름} DFI GHF51에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DFI GHF51 14 페이지. Embedded sbc 1.8”
DFI GHF51에 대해서도 마찬가지입니다: 빠른 참조 (4 페이지)

I/O Connectors

Expansion Slots

Installing the Mini PCIe Module

Before installing the Mini PCIe module into the Mini PCIe socket, please make sure that the fol-

lowing safety cautions are well-attended.

1. Make sure the PC and all other peripheral devices connected to it has been powered

down.

2. Disconnect all power cords and cables.

3. Locate the Mini PCIe socket on the system board

4. Make sure the notch on card is aligned to the key on the socket.

Mini PCIe Full Size

Notch

User's Manual | GHF51

Mini PCIe Socket

Stand-off

Key

Please follow the steps below to install the card into the socket.

Chapter 2

HARDWARE INSTALLATION

Step 1:

Insert the card into the socket at an

angle while making sure the notch

and key are perfectly aligned.

Step 2:

Press the end of the card far from

the socket down until against the

stand-off.

Step 3:

Screw tight the card onto the stand-

off with a screw driver and a stand-

off screw until the gap between

the card and the stand-off closes

up. The card should be lying paral-

lel to the board when it's correctly

mounted.