Billion BiPAC 7700NR2 설정 매뉴얼 - 페이지 3
{카테고리_이름} Billion BiPAC 7700NR2에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Billion BiPAC 7700NR2 11 페이지. Wireless-n adsl2+ firewall router
Billion BiPAC 7700NR2에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄
1. Getting started
Requirements
1.
Any operating system is compatible, however depending on the version this
may affect your Internet experience
2. Internet Explorer 6.0 or higher / Firefox 2.0 or higher
3. Ethernet network adapter
4. Wireless enabled computer (if you are using the wireless feature)
Connecting the Billion BiPAC 7700NR2 to your computer
1.
Connect the network cable to one of the yellow ports located at the back of
the modem; the other end will connect to your computer
2. Connect a telephone cable to the grey port labeled DSL at the back of the
modem; the other end will connect to your telephone wall socket
3. Finally, connect the power cable to your modem and the power adapter to
your power point. Press the power button to the "ON" state
The diagram below shows how the modem connects physically to your phone
line, computer and power point.
4. Now that the modem is connected to your computer, phone line, and is
powered on, you will need to ensure that the lights on the modem indicate the
following:
Power
DSL
LAN (1-4)
A network icon will appear in your task bar, and you are now ready to setup
your Internet connection.
ON
ON
ON or Blinking