AVS RM43B-DVR 설치 매뉴얼 - 페이지 3
{카테고리_이름} AVS RM43B-DVR에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVS RM43B-DVR 5 페이지. Oem replacement mirror monitor with dvr
AVS RM43B-DVR에 대해서도 마찬가지입니다: 소유자 매뉴얼 (9 페이지)
페이지 인쇄
AVS RM43B-DVR
WIRE COLOUR
FUNCTION
RED (ACC)
+12v ACC supply
BLACK
Earth
YELLOW
+12v
FEMALE RCA
V2 camera input
MALE RCA
V1 camera input
See owners manual for operating instructions
AVS RM43B-DVR WIRING DIAGRAM
AVS RM70M
WIRE COLOUR
FUNCTION
RED (ACC)
+12v ACC supply
BLACK
Earth
GREEN
Switches display to V2
FEMALE RCA
V2 camera input
MALE RCA
V1 camera input
BUTTON
FUNCTION
POWER
Power on/off
+ or Ù
Adjust up
MENU
MENU – push to enter menu and scroll through functions
Includes: brightness, contrast, saturation, language, ,mode (16:9 or 4:3), image rotation, factory reset
- or Ú
Adjust display brightness/contrast down
V1/V2
Manually switch between camera inputs
CONNECT TO
+12v switched ACC or ignition on supply
Good earth source e.g. vehicle body/chassis
Constant 12v supply
Reverse camera output. Monitor will auto switch to display this input when a signal is
detected e.g. when the car goes into reverse and powers on the camera. The display will
switch back to V1 or turn off if there is no signal on V1.
Camera output. Monitor will display V1 until a signal is detected on V2 or switch off if no
signal on V1.
AVS RM70
CONNECT TO
Appropriately fused +12v switched ACC supply
Good earth source e.g. vehicle body/chassis
Reverse signal/vehicle reverse light wire (+12v). Use red wire on AVS Camera's RCA lead
Reverse camera output. Monitor will auto switch to display this input when a signal is
detected e.g. when car goes into reverse and powers on the camera. The display will
switch back to V1 or turn off if there is no signal on V1.
Camera output. Monitor will display V1 until a signal is detected on V2 or switch off if
no signal on V1.