CPG 351FGC100DDL 서비스 매뉴얼 - 페이지 8

{카테고리_이름} CPG 351FGC100DDL에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CPG 351FGC100DDL 18 페이지. Gas powered convection ovens
CPG 351FGC100DDL에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)

페이지 인쇄

Service Manual

351FGC100(L/N) | 351FGC200(L/N)K

351FGC100DD(L/N) | 351FGC200DD(L/N)K

Door Switch

Disconnect wires from rear of switch. Check continuity between terminals when switch lever

is in 'CLOSED', position. If continuity is not found in 'CLOSED' position, replace switch. If

found, see below for more testing.

With wires disconnected, check for no continuity between terminals when switch lever is

'OPEN'. If continuity is found, replace switch. If not found, see below.

With unit 'ON' and unit plugged in, check for 120 volts from each terminal to neutral when

switch is 'CLOSED', (Fig. 18) image shows terminal closest should only have 120 volts when

door is closed.

Check for any discoloration or deformations of electrical connections. If any are found,

replace connections.

Fig. 17

Heat on Indicator Light

With unit 'ON', plugged in and unit calling for heat, check for 24 volts between terminals.

Replace if no voltage is found or light does not light (Fig. 19).

Check for any discoloration or deformations of electrical connections. If any are found,

replace connections.

Fig. 19

Fig. 18