CPG 351COHT3A 사용자 설명서 - 페이지 8

{카테고리_이름} CPG 351COHT3A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CPG 351COHT3A 14 페이지. Electric countertop convection ovens

User Manual

Manual Cooking

For manual timed use, the timer does control the baking operation of the oven. Turn 'On' the oven by

pressing the 'On/Off' button . Manual cooking mode is the default and 'MAN' will appear on the display .

To set the temperature press the ' ' button and then select your desired set temperature using the '+' or

'-' buttons . Pressing the ' ' button again, or waiting 5-seconds, will confirm set temperature. Similarly, to

set the 999-minute timer press the ' ' button and then set timer using the '+' or '-' buttons . Then press

the ' ' button again to confirm set timer. To start the cooking cycle, press the 'Start/Stop' button to start

the cooking cycle . The unit will now pre-heat (see below) . When the timer reaches 0 minutes, 'END' will

flash on the display and the unit will 'beep' for 40-seconds at the end of the cooking cycle and the oven

will stop heating .

For manual continuous use and without interruption, turn 'On' the oven by pressing the 'On/Off' button .

Manual cooking mode is the default and 'MAN' will appear on the display . Press the ' ' button and use

the '-' button to go below the minimum timer value and select "- -" . To set the temperature press the

' ' button and then select your desired set temperature using the '+' or '-' buttons . Pressing the ' ' button

again, or waiting 5-seconds, will confirm set temperature. The timer will be displayed as a countdown.

The oven will continue to run until you turn it 'Off' by pressing and holding 'On/Off' button or 'Start/Stop'

at any point to stop cooking program .

Note: At any point during the cooking process, you can change the temperature and time . Manual steam

can be added to the chamber at any point by pressing and holding the steam button .

Note: The actual temperature of the chamber will appear on the display . If you want to display the set

temperature, please press the ' ' button .

NOTE:

When using the steam functions, if the Oven Temperature is BELOW 212°F (100°C ), water

may pool in oven as temperature will be too low to create steam.

Pre-Heating

All digital models feature an automatic pre-heat setting, where 'PRE' will appear on the display and

the oven will heat the chamber to a temperature of 20% higher than the set one . This is necessary to

compensate for heat loss that occurs when opening the door to load product . The oven will 'beep' and

flash when product is ready to be loaded. The unit will not stop 'beeping' or 'flashing' until you open the

door and load product . Once you close the door, your cooking cycle will begin automatically .

Programmable Cooking

In programmable mode, you can create and set 99 programs with 3 stage cooking . In each stage, you can

set temperature, time, and humidity . Please refer to the supporting videos on the program page for added

visualization of recipe and program creation .

NOTE:

For further instruction on programmable cooking, please view the online product page for a

'How-to' video.