ABATEC WAVE.COM4 사용자 설명서 - 페이지 5
{카테고리_이름} ABATEC WAVE.COM4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABATEC WAVE.COM4 8 페이지.
페이지 인쇄USER MANUAL
1
Scope of delivery
Left + Right speakers
AC adapter 9V, 15kW
Stereo jack cable 3.5 mm – 3.5mm, 2 m
Jack adapter 2.5 mm – 3.5 mm, 0.5 m
Jack extension 3.5 mm – 3.5 mm, 3 m
Mounting accessories (screws, Allen key, covers)
Installation/user manual
2
Installation
CAUTION - Damage to the unit:
Prior to installation, remove both transport safety screws and press the two covers into the holes.
The speakers should not be installed directly above the sauna heater.
1. Saw two holes measuring 181 mm x 160 mm into the ceiling of your sauna cabin. Ideally ensure
a distance of approximately 1 m between the speakers. This will give the best stereo sound.
2. Position the speakers in the holes and fix these in place using two of the stainless steel screws
supplied.
CAUTION - Damage to the unit:
Air must circulate freely around the cooling fins on the back of the unit to cool the electronics. The
back of the unit must therefore not be covered by objects or materials.
3
Connections
a)
"Right speaker" output
2.5 mm jack, use the 0.5 m adapter cable and the 3 m jack extension cable to connect the
b)
Line-in
3.5 mm jack (stereo), connect your audio source (MP3 player, etc.) here. Use the 2 m stereo
jack cable provided.
c)
AC input
230V ~
DC 9V, 15W, the unit must only be operated using the AC adapter supplied.
d)
"Right speaker" input
For connection see a)
WE DO IT FIRST.
output to the right speaker d).
PAGE 5/8