DFRobot DFR0274 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} DFRobot DFR0274에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFRobot DFR0274 12 페이지. Rgb led strip driver shield

Specification



Supply voltage:<=12V



Compatible Uno，Mega，Romeo......



Compatible with 12V RGB LED Strip



Maximum power is 72W （2A per way）



Support IR remote control

Pin Out

Arduino Driving Pins:



D9 -> PWM1 (Blue Output control)



D10 -> PWM2 (Red Output control)



D11 -> PWM3 (Green Output control)

IR Recieving Pin:



D4 -> IR data receiving

PS: This feature could be disable by removing the jumper cap on the shield.

Note:

1. Commonly we use the common anode RGB LED Strip. So when connecting the RGB Strip to the

driver shield, it requires a independent 12v power source for the high power LED strip.

2. The maximum powering current from this shield is about 9A totally(3A for each way). So it could

almost directly drive a 10 meter RGB LED strip.

Arrow.com.

Downloaded from