DFRobot DFRduino Romeo-All in one Controller V1.1 매뉴얼 - 페이지 4
{카테고리_이름} DFRobot DFRduino Romeo-All in one Controller V1.1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFRobot DFRduino Romeo-All in one Controller V1.1 13 페이지.
페이지 인쇄
The Romeo V1.0 uses an automatic switcher for the power source selection. When the external
power source has been applied, the servo will be automatically powered by the external power
instead of USB power.
Motor Control Pin Jumper
Applying the Motor Control Pin Jumpers will allocate Pin 5,6,7,8 for motor control.
Removing the jumpers will release the above Pins, and the motor controller will be disabled.
Tutorial
Button Press
RoMeo has 5 build in buttons S1-S5 (Figure 2). S1-S5 use analog input 7,
"Button Pin Map"
Pin
Fig2: Romeo Buttons
Example use of Button 1‐5
char msgs[5][15] = {
"Right Key OK ",
"Up Key OK
",
"Down Key OK
",
"Left Key OK
",
"Select Key OK" };
Analog Pin 7
Function
Button S1-S5