Allied Telesis Rapier AR 300 Series 빠른 설치 매뉴얼 - 페이지 4
{카테고리_이름} Allied Telesis Rapier AR 300 Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis Rapier AR 300 Series 9 페이지. Ar300 series router
Allied Telesis Rapier AR 300 Series에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (8 페이지), 문제 해결 (5 페이지)
페이지 인쇄
4
Package Contents
The following items are included with each AR300 Series router. Contact your
sales representative if any items are damaged or missing.
One AR300 Series router.
One AC power cord.
One terminal cable for connecting the router to a terminal or PC.
Two ISDN network cables.
One AR300 Series router Quick Install Guide.
One Safety and Statutory Information booklet.
One AR300 Series router Documentation and Tools CD-ROM (which
includes the complete AR300 Series Document Set, and utilities).
One warranty card.
Selecting a Site
The router should be installed on a level surface such as a desktop or bench.
When installing the router, choose a site that:
Allows adequate airflow around the router and its vents. Do not stack
routers directly on top of one another as this leaves insufficient room for
airflow.
Is free of dust and moisture.
Will allow the router to operate within a temperature range of 0 to 40º C (32
to 104º F) and a humidity range of 5 to 95% non-condensing.
Has a reliable and earthed (grounded), preferably dedicated and filtered,
power supply circuit.
Does not expose cabling to sources of electrical noise, such as radios,
transmitters, broadband amplifiers, power lines, electric motors, and
fluorescent fixtures.
Allows easy access to the router's power and cable connections.
Installing the Router
This equipment must be earthed.
Follow these steps to install the router:
1.
Read the safety information
For safety information, see the Safety and Statutory Information booklet. A
copy of this booklet is supplied with each router, and can also be found on
the Documentation and Tools CD-ROM or at www.alliedtelesyn/
documentation/documentation.html.
AR300 Series Router
C613-04026-01 REVD