DG SATA-IP 지침 - 페이지 3

{카테고리_이름} DG SATA-IP에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DG SATA-IP 10 페이지.

dg_sata_ip_dev_demo_instruction_at7_en.doc

5. Connect AB10-PATAFMC to FMC-HPC connector (J30) on AC701, as shown in Figure

2-3

6. Connect micro USB cable from Digilent (U26) on AC701 board to PC for JTAG

programming as shown in USB connector on AC701.

7. (Optional) Connect mini USB cable from AC701 board to PC for UART connection to

display debug message. Open serial monitoring software such as TeraTerm. Terminal

settings: Baud Rate=115,200 / Data=8 bit / Non-Parity / Stop=1.

8. Connect Power cable to AC701 board and then power up.

17-Jun-21

Figure 2-3 AB10 and AC701 connection

Figure 2-4 USB connector on AC701

Page 3