DG VCU118 빠른 시작 매뉴얼 - 페이지 10
{카테고리_이름} DG VCU118에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DG VCU118 15 페이지. Fpga setup for 2-ch raid0 by nvme-ip demo
페이지 인쇄dg_nvmeip_raid0x2_fpgasetup_xilinx_en.doc
5) After connecting USB cables to PC, many COM ports are detected.
a) KCU105/VCU118: Select Standard COM port
b) ZCU106/ZCU102/VCK190: Select the lowest number of the additional COM ports.
Figure 2-6 Additional COM port when USB cable is plugged-in
On Serial console, the setting is as follows.
Set Buad rate=115,200, Data=8-bit, Non-Parity, and Stop = 1, as shown in Figure 2-7.
3-Aug-22
Figure 2-7 Serial console setting
Page 10