DG NVMeG4-IP 사용 설명서 - 페이지 6
{카테고리_이름} DG NVMeG4-IP에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DG NVMeG4-IP 16 페이지. Nvme ip with pcie gen4 soft ip
페이지 인쇄dg_nvmeg4ip_instruction_xilinx_en.doc
7) Check LED status on FPGA board. The description of LED is as follows.
GPIO LED
0
1
2
3
8) After completely FPGA programming, LED[0] and LED[1] turn on until finishing the
initialization process. After that, LED[1] turn-offs.
Figure 2-7 LED status after finishing program configuration file and PCIe initialization
9) On the console, the message is displayed to show current status as follows.
• "Waiting IP initialization" is displayed when starting system initialization.
• After finishing IP initialization, Main menu is shown on the console as shown in Figure
2-8.
20-Apr-20
Table 2-1 LED Definition
ON
Normal operation
System is busy
IP Error detect
Data verification fail Normal operation
Figure 2-8 Main menu after finishing initialization
Clock is not locked or reset button is pressed
Idle status
Normal operation
OFF
Page 6