CPI Talos T6 설치 매뉴얼 - 페이지 6

{카테고리_이름} CPI Talos T6에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CPI Talos T6 18 페이지.
CPI Talos T6에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

This chapter outlines:
• How to unpack the note validator
How to mount the note validator
Unpack the note validator and immediately inspect it for damage.
Keep the original packing materials for shipping or transporting the note validator.
Only the person or company receiving the note validator can file a claim against the carrier for concealed damages.
If the unit is damaged:
Return it to its original carton along with packing materials.
Notify the delivering carrier of damages and request immediate inspection.
Send a letter of intent to file a claim to the carrier within 72 hours from the time of delivery.
Send a copy of the letter to the shipper.
The Talos T6/T8 note validator is designed to fit into the standard note validator opening in most host machines and can be mounted on
existing studs provided by original equipment manufacturers (OEMs).
Some host machines require brackets or faceplates to mount the unit properly. Refer to the host machine's operation manual or contact the
distributor/OEM for more model-specific mounting information.
To mount the note validator in the host machine:
Turn off power to the host machine.
Mount the note validator on the mounting studs, through the opening on the front of the host machine, and secure it using the included
hardware.
Connect the note validator to the appropriate interface harness.
• Install the (12) pin connector into the bottom of the interface slot, matching connector keys to blank pin locations. See Figure 1.
• Apply gentle pressure to connect; the pins will bend if forced.
• A power cord (available separately — Part Number 01-12-139C, 115 V only) may be used for supplying power to the note validator
and for routing pulse credits to a coin switch.
6
Risk of electric shock.
Ensure host machine power is OFF when installing, maintaining, or cleaning the Talos T6/T8 note validator.
Electric shock can cause serious injury or death.
115 V Model
Figure 1
Published by CPI
Talos™ T6/T8 Note Validator
12 VDC and 24 VAC Models
01_CPI_Talos T6 and T8 Note Validator_Installation Guide_V2.0_EN