Allied Telesis SWITCHBLADE 4000 구성 방법 - 페이지 7
{카테고리_이름} Allied Telesis SWITCHBLADE 4000에 대한 구성 방법을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis SWITCHBLADE 4000 9 페이지. Switchblade 4000 series power supply unit
Allied Telesis SWITCHBLADE 4000에 대해서도 마찬가지입니다: 데이터시트 (9 페이지), 개요 (1 페이지), 보충 설명서 (6 페이지), 빠른 설치 매뉴얼 (8 페이지)
페이지 인쇄
Distribution switch 1 configuration
The LAN off this switch uses VLAN 1. This exists by default, so you only need to change
ports 1 and 2 to tagged ports and enable STP. STP is necessary because each distribution
switch forms a loop with the two core switches.
Distribution switch 2 configuration
The LAN off this switch uses VLAN 2, which you need to create.
Distribution switch 3 configuration
The LAN off this switch uses VLAN 3, which you need to create.
Page 7 | AlliedWare™ OS How To Note: VRRP
set system name=distro1
enable stp=default
set stp=default mode=rapid
set vlan=1 port=1-2 frame=tagged
set system name=distro2
create vlan=vlan2 vid=2
add vlan=2 port=3-24
add vlan=2 port=1-2 frame=tagged
enable stp=default
set stp=default mode=rapid
set system name=distro3
create vlan=vlan3 vid=3
add vlan=3 port=3-24
add vlan=3 port=1-2 frame=tagged
enable stp=default
set stp=default mode=rapid
Distribution switch 1 configuration