Allied Telesis TurboStack AT-TSA9 사용자 설명서 - 페이지 9

{카테고리_이름} Allied Telesis TurboStack AT-TSA9에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis TurboStack AT-TSA9 18 페이지. At-tsax appliqués

TurboStack™ Hub Appliqués

This manual describes the hub appliqué options and installation procedures for

ATI's TurboStack™ hubs. For information on the software installation and

network management aspects of TurboStack hubs, see the separate TurboStack

Manageable Hub Installation Manual and TurboStack AT-S10 Operations

Manual. These publications are shipped with each manageable hub.

In a TurboStack department concentrator chassis, manageable hubs can be

connected to network zones using different cable media by installing different

appliqués or external transceivers.

Note

This manual refers to two or more chassis-mounted hubs, at least one of which is

manageable, as a department concentrator. The term hub refers to either a

standalone hubs (i.e., a single manageable device) or a department concentrator

configuration.

The appliqué port on all TurboStack hubs with management are pre-conﬁgured

with the AUI appliqué. You can conﬁgure the AUI network port to another media

type by using an external transceiver. Table 1 shows the ATI micro transceivers

available for this purpose.

Model

Description

AT-MX40F/ST

Fiber Optic (10BASE-FL), ST Connector

AT-MX50F/SM

Fiber Optic (10BASE-FL), SMA Connector

AT-MX55F/SC

Fiber Optic (10BASE-FL), SC Connector

AT-210T/210TS/MX20T

UTP (10BASE-T), RJ45 Connector

AT-MX10/MX10S

Thin Ethernet (10BASE2), BNC Connector