Avsl Citronic DSM26 사용자 설명서 - 페이지 9

{카테고리_이름} Avsl Citronic DSM26에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avsl Citronic DSM26 12 페이지. Digital speaker management system
Avsl Citronic DSM26에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)

페이지 인쇄

The software will normally be able to detect the correct COM port and this will be displayed.

Click OK to confirm the USB connection between PC and DSM26. If unsuccessful, try a different COM port from the list.

If COM port is not detected automatically, open the PC's Hardware Device Manager.

(e.g. "Start-Settings-Control Panel-System-Hardware-Device Manager" or type "Device Manager" into the search box)

Look in "Ports" to identify which port is being used for the DSM26.

Select the correct port for the connected DSM26 in the Connection menu (COM4 is shown in the above example)

If connecting via LAN, enter a workable IP address which is not occupied by other equipment into the "Network" field.

Program menu

Clicking on the Program button at the top of the main screen will open the following window.

Channel setup

Clicking the Ch Setup button will open the widow shown opposite.

Click in each window and type a name for each input and output,

then hit return to rename that channel

Copy function

Clicking the Copy button in the main screen will open the

widow shown opposite.

Select inputs (left side) or outputs (right side) to copy from

and to and click OK to copy all settings across.

System menu

Clicking the System button in the main screen will open

the widow shown opposite.

Select LCD backlight constant or off after 25s

Select cutoff temperature for the device

Interface information is shown in the 4 fields on

the right side of the window and can be edited

by typing directly in each and clicking Update

Load/Delete group user data or effect data from device

Save/Delete group user data or effect data from device

Load group user data or effect data from PC

Load all group user data or effect data from PC

Save group user data or effect data from PC

Save all group user data or effect data from PC

To load a program, check button A, click on the program in the list in

the top half of the window and then click the Load button.

To delete a program, click on it in the list in the top half of the

window and then click the Delete button.

To save a program after editing, check button B, select a blank

program or one for over-writing, type a name in the text field and

click the Save button.

Selected programs or All programs may be saved to PC or loaded

from PC by checking buttons C, D, E or F and clicking "OK"

170.665UK User Manual