Avsl Citronic DSM26 사용자 설명서 - 페이지 5

{카테고리_이름} Avsl Citronic DSM26에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avsl Citronic DSM26 12 페이지. Digital speaker management system
Avsl Citronic DSM26에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)

페이지 인쇄

Output Parameter setting

Pressing a Mute/Edit button will Mute or un-mute that specific input.

Press & hold the MUTE/EDIT key for IN A or IN B for 3 seconds to enter edit mode.

Using the BACK and NEXT navigation buttons will step through the various menu options.

1. Output Name

Parameter 1 rotary control selects the letter or figure

Parameter 2 rotary control moves to the next or previous character

Press ENTER to confirm when the name is set as required

2. Signal Source

Select On or Off for signal input A and input B

Parameter 1, 2 or 3 rotary control selects on or off status

Press ENTER to toggle between input A and input B

3. Output Gain

Gain range -40 to +15dBu

Parameter 1 rotary control adjusts output gain

4. Output Polarity

Polarity [+] Normal / [-] Inverted (independent for each channel)

Parameter 1 rotary control toggles between + and - polarity

5. Output Delay

Delay 0-1000ms / 0-346m / 0-1134.88ft (independent per channel)

Parameter 1 rotary control performs fine adjustment

Parameter 2 rotary control performs coarse adjustment

6. Crossover HPF

Crossover High-pass filter settings (independent per channel)

Parameter 1 rotary control adjusts cutoff frequency (20Hz-20kHz)

Parameter 2 rotary control sets filter type (Linkwitz-Riley, Bessel, Butterworth)

Parameter 3 rotary control sets the slope gradient (12/18/24/48dB per octave)

7. Crossover LPF

Crossover Low-pass filter settings (independent per channel)

Parameter 1 rotary control adjusts cutoff frequency (20Hz-20kHz)

Parameter 2 rotary control sets filter type (Linkwitz-Riley, Bessel, Butterworth)

Parameter 3 rotary control sets the slope gradient (12/18/24/48dB per octave)

All manuals and user guides at all-guides.com

170.665UK User Manual