Avsl Qtx PAL15 사용자 설명서 - 페이지 3
{카테고리_이름} Avsl Qtx PAL15에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avsl Qtx PAL15 9 페이지. Portable pa unit with led light show
페이지 인쇄
Rear Panel
Powering up
Your new PAL SERIES portable home PA unit may arrive with the internal battery charged.
Before connecting to the mains, turn down all volume controls and switch the unit on (24) and
the power LED should light (9). The battery charge status is shown on 4 LED indicators (8).
If there is little or no charge, you will need to charge the battery before using away from
mains power.
Connect the PAL SERIES unit to the mains using the UK/EU 13.5Vdc adaptor supplied (26),
which is supplied with UK and EU pin connectors. Slide the correct type in place until it latches.
When not in use but connected to the mains, if the POWER switch (24) is in the OFF position,
the internal battery will be re-charged from the mains supply, indicated by a CHARGING LED
(10) which lights when charging.
You may otherwise opt to connect the DC input at the rear (12) to an external 12Vdc supply
(e.g car battery) or use the internal battery if charged.
1
Media player display
2
USB port
3
SD/MMC card slot
4
Media player mode
5
Media player repeat play setting
6
VHF microphone volume
7
VHF microphone antenna
8
Battery status LEDs
9
Power LED
10
Charging LED
11
Front LED lights power on/off
12
12Vdc power input terminals
13
Media player USB/SD source select
14
Previous track (hold for seek)
15
Next track (hold for seek)
16
Play/Pause
17
3.5mm AUX input
18
Master volume
19
Treble boost/cut
20
Bass boost/cut
21
Wired mic/guitar volume
22
Echo effect level
23
6.3mm jack mic/guitar select
24
Power on/off
25
Wired mic/guitar input 6.3mm jack
26
13.5Vdc power input
PAL SERIES User Manual