Avsl Qtx QRPABT Series 사용자 설명서 - 페이지 5

{카테고리_이름} Avsl Qtx QRPABT Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avsl Qtx QRPABT Series 6 페이지. Portable pa units

Internal USB/SD player & Bluetooth receiver

The QRPABT onboard media player can play back files from USB/SD/FM media or a paired

Bluetooth device.

Insert a USB memory stick or an SD card with compressed digital audio files stored on it into

the relevant slot on the top panel. Playback will normally start automatically from the last

media inserted (USB or SD).

If the LCD display shows a jack plug, press the USB/SD button and check that the LCD display

shows that media is being read from the USB or SD device. If not, press the

removing and re-inserting the memory device.

Increasing the Master Volume control (21) should result in the audio being played through the

speakers.

Panel controls are detailed below...

MODE





To connect a smart phone or other Bluetooth device to the DELTA-50 media player, open the

Bluetooth menu on your device and search for "PA SYSTEM". Pair with this ID and connect (re-

name if desired) in order to be able to play audio from the Bluetooth device to the DELTA-50.

Pressing the MODE button will select between FM, Bluetooth and USB/SD playback sources.

(Note: there is also an AUX setting which is not used, since the mixer has separate line inputs)

Mute, volume and track navigation can be achieved via the media player control panel.

Bluetooth pairing is always available for a single device so long as the device is within

reception range. It may be necessary to re-connect if the device has moved out of range and

disconnected.

In addition to the panel controls, an infra-red remote control is provided for the media player

which adds some further functions to allow greater control over the media player.

To operate, remove the clear plastic tab from the remote to activate the battery.

Charging the battery

When not in use but connected to the mains, if the POWER switch is in the

internal battery will be re-charged from the mains supply. This can be observed by the

CHARGE LED which will light orange when charging. When fully charged, the CHARGE LED will

change to green.

switches input between USB/SD/FM media or Bluetooth

press for previous track

press for next track

Repeat mode

Play/Pause playback

button or try

off

position, the

QR12PABT QR15PABT User Manual