Avsl Qtx PAL8 사용자 설명서 - 페이지 3
{카테고리_이름} Avsl Qtx PAL8에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avsl Qtx PAL8 9 페이지.
페이지 인쇄Rear Panel
Powering up
Your new PAL8 portable home PA unit may arrive with you with the internal battery charged.
Before connecting to the mains, turn down all volume controls and switch the unit on (7) and
the power LED should light. The battery charge status is shown on 4 LED indicators (6).
If there is little or no charge, you will need to charge the battery before using away from mains
power.
Connect the PAL8 unit to the mains using the IEC lead supplied (9) or a suitable equivalent.
When not in use but connected to the mains, if the POWER switch is in the OFF position, the
internal battery will be re-charged from the mains supply, indicated by a CHARGING LED, which
lights when charging.
You may otherwise opt to connect the DC input at the rear (8) to an external 12Vdc supply (e.g
car battery) or use the internal battery if charged.
1
Media player display
2
Media player and LED controls
3
Line output (2 x RCA)
4
VHF microphone volume
5
Line input (3.5mm jack & 2 x RCA)
6
Battery status LEDs
7
Power on/off
8
12Vdc external power input terminals
9
IEC mains power inlet & fuse
10
MicroSD/TF card slot
11
USB pen drive input
12
Master volume
13
Treble boost/cut
14
Bass boost/cut
15
Echo effect level
16
Wired mic volume
17
Guitar input volume
18
VHF microphone antenna
19
Wired microphone input (6.3mm jack)
20
Guitar input (6.3mm jack)
178.960UK User Manual