Allied Telesis 210 빠른 설정 매뉴얼 - 페이지 3
{카테고리_이름} Allied Telesis 210에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis 210 8 페이지. Adsl router quick setup guide
페이지 인쇄A
Default Settings for New Zealand
VPI
VCI
Authentication
Connenction Type
Encapsulation
DSL Configuration
B
Preparation
Before you start, make sure your computer meets the minimum requirement
Computer Requirements :
>
USB installed on your PC/MAC
>
TCP/IP protocol is installed
Note :
-
For USB connection type for standalone computers, you must install USB driver to
get it done. The driver can be found on the enclosed CDROM.
Details from your ISP :
>
Login name and password
e.g.
>
DNS server(s) ip address(s)
e.g. 203.96.91.1
C
Connecting the AR210
For a step by step guide Refer to the Installation guide on Pages 8-10 for a PC :
>
Connect the telephone cable (provided) to the AR210 then connect the other end to the
ADSL port that telecom has installed. Do not connect the ADSL Router through a
Microfilter.
>
Connect the USB (cable provided) to your PC's USB port and the other end to the
AR210.
:
0
(by default, do not change)
:
100
(by default, do not change)
:
PPP using PAP
:
PPPoA Routed
(by default, do not change)
:
Vc-Mux
(by default, do not change)
:
G.DMT/Multi (by default, do not change)
below: