Allied Telesis AR450S 빠른 설치 매뉴얼 - 페이지 9

{카테고리_이름} Allied Telesis AR450S에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AR450S 12 페이지. Ar400 series
Allied Telesis AR450S에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (12 페이지)

페이지 인쇄
Allied Telesis AR450S 빠른 설치 매뉴얼
Quick Install Guide
C613-04032-01 REV E
3.
Enable IP.
At the CLI, enter the command:
enable ip
4.
Assign an IP address to VLAN1.
Assign the VLAN1 interface an IP address in the subnet that the PC uses,
using the command:
add ip interface=vlan1 ip=ipaddress mask=mask
5.
Browse to the GUI.
If you access the Internet through a proxy server, set your browser to
bypass the proxy for the IP address you assigned to the VLAN1 interface.
Point your web browser at the IP address of the VLAN interface.
6.
Log in and set the password.
At the log in prompt, enter the log in name and password. Passwords are
case sensitive.
User Name: manager
Password: friend
The system status page appears and you can now use the GUI to configure
the router.
To ensure configuration settings are saved correctly, use the GUI menus and buttons to
navigate, not your browser's buttons.
As a security precaution, change the password as soon as possible.
To change the password, select Management > Users from the sidebar
menu. Select the Manager account and click Modify.
7.
To access context-sensitive help in the GUI.
Click on the Help Button [Help]. The Help button is located at the top of
the sidebar menu or on any popup page.

Connecting the Data Cables

Connecting the router to your network:
1.
Connect to the LAN
If you have not already done so, use straight-through Ethernet patch cables
to connect the device(s) on your private network (LAN) to the router's
switch port(s). By default, all switch ports are members of VLAN1.
9