Allied Telesis AR750S 매뉴얼 - 페이지 5

{카테고리_이름} Allied Telesis AR750S에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AR750S 10 페이지.

Getting Started

Software Version 2.8.1

C613-03119-00 REV A

Setting System Parameters

If you are using ISDN, you can use a global setting to set the router to defaults

appropriate for the territory where you operate. The command is:

set system territory

To aid in identifying the router you can name it, specify its location, and

identify the person responsible for administering it. These settings are

controlled by the commands:

set system name

set system location

set system contact

The system name is displayed as part of the command prompt, and all three of

the above settings are displayed in the output of the command:

show system

You can set the router's time and date, which are displayed in log messages, by

using the command:

set time

For more information, see

Configuring and Monitoring the

Saving Configurations Entered

with the CLI

To view the router's current dynamic configuration, enter the command:

show configuration dynamic

If the router restarts (boots), any changes to the dynamic configuration are lost

unless you have saved them by entering the command:

create config=filename.cfg

The filename can be up to 28 characters long. The configuration file that you

create with this command records passwords in encrypted form, not in

cleartext.

To set the router to execute this configuration file when it restarts, enter the

command:

set config=filename.cfg

"System Identification" on page 4-3 of Chapter 4,

System.

1-5