CPS TEMP-SEEKER TM360 운영 매뉴얼 - 페이지 5
{카테고리_이름} CPS TEMP-SEEKER TM360에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CPS TEMP-SEEKER TM360 13 페이지. Precision thermo-psychrometer
CPS TEMP-SEEKER TM360에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)
페이지 인쇄1.800.561.8187
KEY
Press to turn ON, press and hold for 3 sec. to turn OFF
A, B, C, D
Press to display probe measurement of that channel
Press to display relative humidity, dry bulb, wet bulb or dew
RH,DB,WB,DP
point temperatures. Use TMX3RH accessory probe or
wet-sock method
Press to display the lowest (MIN), current (CUR) or highest
MIN,CUR,MAX
(MAX) value of the channel selected
Press to clear the MAX/MIN values of channel selected to
CLR
current (NORM)value. Press and hold while turning instrument
ON to enable or disable the Automatic Power Off feature
Press this key followed by any two of the A, B, C or D keys to
DIFF
display the algebraic difference between the two selected
channels
Press to display the measurements of each temperature channel
SCAN
in 3 second intervals
I / M
Press to select Metric or Imperial units of measurement
Press to turn on the LCD backlight for 15 seconds
The display defaults to Channel A when initially turned ON.
Channel AUX: Designated for use with the TMX3RH accessory probe to provide direct
RH,DB,WB and DP measurements.
Channel A:
General purpose temperature measurements and the default dry bulb
channel for humidity measurements obtained using the
Wet Sock method (See page 7 for more information).
Channel B:
General purpose temperature measurements and the default wet bulb
channel for humidity measurements obtained using the
Wet-Sock method (See page 7 for more information).
Channel C:
General purpose temperature measurements.
Channel D:
General purpose temperature measurements.
www.
UNIT OPERATION
FUNCTION
5
.com