Allied Telesis AT-8748XL 빠른 설치 매뉴얼 - 페이지 10

{카테고리_이름} Allied Telesis AT-8748XL에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-8748XL 10 페이지. At-8700xl series switch
Allied Telesis AT-8748XL에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (10 페이지)

페이지 인쇄

System LEDs

System LEDs on its front panel indicate the switch's operational status.

System LEDs

LED

State

Power

Green

Fault

Red

1 flash

3 flashes

4 flashes

5 flashes

RPS

(Redundant

Green

Power Supply)

1. DC models of the switches do not have an RPS connector and the RPS LED will not function.

The AT-8700XL Series Hardware Reference has further troubleshooting

information, including information on Switch Port and Uplink Module LEDs.

Documentation and Tools CD-ROM

The Documentation and Tools CD-ROM bundled with each AT-8700XL Series

switch contains the complete Documentation Set for your switch and its

expansion options, as well as tools for managing the switch. This includes:

■

The AT-8700XL Series Safety and Statutory Information booklet, which

provides safety and statutory information for the AT-8700XL Series switch

and its expansion options.

■

The AT-8700XL Series Hardware Reference, which provides detailed

information on the hardware features of AT-8700XL Series switches.

■

This Quick Install guide.

■

The AT-8700XL Series Software Reference, which provides detailed

information on configuring the switch and its software.

■

The Uplink Module Quick Install Guide, which outlines the procedure for

installing an Uplink Module; and the Uplink Module Hardware Reference,

which provides detailed information on Uplink Modules.

■

AT-TFTP Server for Windows for downloading software releases.

■

Adobe Acrobat Reader for viewing online documentation.

AT-8700XL Series Switch

Function

The switch is receiving power and the voltage

is within the acceptable range

The switch or management software is

malfunctioning

A switch fan has failed. (The LEDs will not

indicate an RPS fan failure.)

If an RPS is connected, the switch's PSU (Power

Supply Unit) has failed

If RPS monitoring is enabled, the RPS PSU has

failed

If RPS monitoring is enabled, an RPS is not

connected or is not operational

An RPS is connected to the switch

C613-04042-01 REV E