DGH 555B 빠른 참조 매뉴얼

{카테고리_이름} DGH 555B에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DGH 555B 2 페이지.

DGH 555B 빠른 참조 매뉴얼
4
Pachette
!
These instructions are intended to be used as a quick reference. They are not a substitute for reading the
operator's manual. Be sure that the operator is familiar will all aspects of the device before use.
POWER MODES
 ON/OFF: To manually turn on the device, press the PWR key. To turn off the device, press and hold the PWR key until
the screen goes blank.
 STANDBY: The device w ill enter Standby after 1 minut e of inactivity. This is indicated by a blinking black box. Press the
PWR key to bring the device out of Standby.
 SLEEP: The device w ill ' Sleep' after an additional 3 minutes of inactivity. The screen w ill go blank. Press the PWR key to
bring the device out of ' Sleep' .
OBTAINING MEASUREMENTS (Continuous Averaging Mode)
See section 8 of the operator's manual for instructions on obtaining measurements using the Pachette 4.
 POWER ON: Turn on t he device by pressing t he PWR key. The device w ill perform self -tests and
then display the measurement screen.
 SELECT EYE: OD or OS w ill be displayed in the corner (OD by def ault). This is the eye that is being
measured. Press t he OD or OS key to change w hich eye is being measured.
 MEASURE FIRST EYE: Gently applanate the probe tip to the cornea at a perpendicular angle
to initiate measurement . The device w ill aut omatically begin taking measurements of the first eye.
 PAUSE: After all measurements are taken for the first eye, the device w ill emit tw o long beeps
and pause for 4 seconds bef ore sw itching t o the other eye for measurement.
 MEASURE SECOND EYE: Gently applanate the probe tip to the cornea at a perpendicular angle to
initiate measurement. The device w ill automatically begin taking measurement s of the second eye.
 MEASUREMENT COMPLETE: After all measurement s are taken f or the second eye, the device w ill beep
and pause 4 seconds. It w ill then ret urn t o the first eye for review .
REVIEWING MEASUREMENTS (Continuous Averaging Mode)
 SELECT EYE: Press the OD or OS key to review t he measurements for the corresponding eye.
Avg ##: Indicates that the measurement displayed (AAAµ) is the average of ## single
measurements.
Std Dv: Show s the calculat ed Standard Deviation (B.Bµ).
 SCROLL MEASUREMENTS: Press the
Mea ##: ## indicat es w hich measurement is being show n, and the measurement (CCCµ).
 DELETE A MEASUREMENT: If a measurement seems erroneous, press the DEL key w hile it is
being displayed and it w ill be deleted. The device w ill recalculate the average and standard deviation of the remaining
measurements.
CLEARING MEASUREMENTS
 CURRENT PATIENT CLEAR MENU: Press the CLR key to enter the Clear Menu. Press the
the clearing options. The f ollow ing options apply to the patient currently being view ed:
All Current Meas: Clears all OD and OS measurements of the current patient.
OD Current Meas: Clears all OD measurements of t he current patient.
OS Current Meas: Clears all OS measurements of the current patient .
Nothing (Exit): Exits the menu w ithout clearing any measurements.
 OTHER CLEARING OPTIONS in the menu affect the patient information stored in memory. Please review section 6.1 in
the user manual for information on st ored patient records.
CONFIGURING THE PACHETTE 4
See section 9 of the operator's manual for instructions on configuring the Pachette 4.
 CONFIGURATION MENU: Press the CFG key to ent er the Configuration Menu. Navigate through the Configuration Menu
by repeatedly pushing the ENT key. Use the
DGH TECHNOLOGY , INC.
FOR TECHNICAL ASSISTANCE, CALL:
(610) 594-9100
110 SUMMIT DRIVE
(800) 722-3883
SUITE B
Mon-Fri: 9:00am – 5:00pm EST
EXTO N, PA 1934 1
USA (6 10) 594 -9100
www.dghkoi.com
Quick Reference Guide : Page 1
or
key to scroll t hrough the individual measurements.
,
,
EMERGO EUROPE
Molenstraat 15
EC
REP
2513 BH, The H ag ue
The Netherlands
Phone: +31.70.345.8570
OD or OS keys to change values. Press t he CFG key again to exit.
DOCUMENT NUMBER:
DGH 555B-INS-QKREF Rev.0
TECHNOLOGY, INC.
Avg 0:
OD
Std Dv: 0.0µ
Avg ##: AAAµ
OD
Std Dv: B.Bµ
Mea ##: CCCµ
OD
Std Dv: B.Bµ
or
key to scroll through
THIS GUIDE FOR USE WITH:
FIRMWARE v3.0.0
SOFTWARE v1.1.0