Allied Telesis AT-AR236E 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Allied Telesis AT-AR236E에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-AR236E 10 페이지. Allied telesis at-ar236e adsl router
Allied Telesis AT-AR236E에 대해서도 마찬가지입니다: 간편한 시작 (19 페이지)

페이지 인쇄

ADSL ROUTER 236E QUICK START GUIDE 1.0

A. Contents

Check that you have received the following items in the AT-AR236E pack.

1. AT-AR236E Router.

2. 240 VAC to 9VDC power adapter.

3. ADSL Phone Cable (BT to RJ11).

4. Ethernet Patch Cable (RJ45 to RJ45).

5. USB Cable.

6. AT-236E Installation Manual and Quick Start Guide.

B. Pre-Installation

Check that the PC you are using to complete this initial setup has a working

Ethernet port and that the IP protocol is installed.

Have your ISP account details available. This is to include the ADSL login and

password information.

Have an ADSL line filter installed onto the incoming telephone line. This can be

done once for the premises in which case there will be an ADSL outlet provide by

the installer. Alternatively, filters can be plugged into all phone outlets on that line

and the phones plugged into the filter. A filter is not required on the phone outlet

that the ADSL router is to use.

C. Connection

Using the Ethernet patch cable connect the PC's NIC interface to the router's

Ethernet port, an RJ45 socket. Plug the power pack into a mains outlet and

connect the DC power cable to the 9VDC power socket on the router.

Use the telephone cable to connect the ADSL socket on the router to the ADSL

wall outlet supplied by Telecom or to a non-filtered telephone wall outlet making

sure that all other telephone outlets are now equipped with filters.

Turn on power to the PC and the router.