Allied Telesis AT-WR4662n 명령 참조 매뉴얼 - 페이지 4

{카테고리_이름} Allied Telesis AT-WR4662n에 대한 명령 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-WR4662n 16 페이지. High-speed mobility wireless base router
Allied Telesis AT-WR4662n에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (2 페이지)

Allied Telesis AT-WR4662n 명령 참조 매뉴얼

How do the nodes in a Wireless Distribution System work?

The WLAN nodes may be classified as "root", "non-root" and "repeater" nodes.
A "root" node is connected to the core network via either wired lines or a wireless link on a
different channel.
"non-root" nodes are connected to the core network via the "root" node and optionally
through the agency of a "repeater" via wireless multi-hop relay.
Note: Any wireless node halves the effective throughput, because all nodes share the same wireless
medium and the access point has to retransmit the information between the client side and the root
access point. Do not deploy WDS with more than two hops ("repeater" + "non-root bridge").
All wireless nodes in the WDS must have the same authentication and encryption methods.
The "root" node is the master device and it selects the designated channel. All the other
nodes will hook on to the designated channel using RF scanning.
4
PN 613-001765 Rev.A