Allied Telesis AT-WR4662n 명령 참조 매뉴얼 - 페이지 7

{카테고리_이름} Allied Telesis AT-WR4662n에 대한 명령 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-WR4662n 16 페이지. High-speed mobility wireless base router
Allied Telesis AT-WR4662n에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄

Connecting AT-WR4600 products

There are two options for accessing the Command Line Interface of devices:

SSH remote shell, using any text-mode SSH client software.

RS-232 DTE console interface; note, this is optional and is not always available.

Accessing the device via SSH

The Secure Shell (SSH) is an encrypted networking protocol, allowing users to configure the

device through an Ethernet network. Microsoft does not supply an SSH tool, you can use an

alternative program such as Tera Term Pro, which is licensed under GPL2. The device is

factory configured with the static IP address 192.168.1.1. If the device is receiving an IP

address from a DHCP server, please check the assigned IP address.

Accessing the device via RS-232

To access the device via RS-232, you can use either the built-in Microsoft HyperTerminal

(note it was removed from Windows Vista and later versions) or an alternative program such

as Tera Term Pro.

RS-232 Option

Transmission rate

Data length

Stop bit

Parity

Flow control

PN 613-001765 Rev.A

Setting

115200bps

8 bit

1 bit

None