Avtech 702 Series 빠른 설정 매뉴얼 - 페이지 4
{카테고리_이름} Avtech 702 Series에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech 702 Series 7 페이지.
페이지 인쇄
QUICK SETUP
With
Cloud Account Management
a).The device access right is managed by Owner, and the
registered devices cannot be registered again unless the
machine has restored the default settings.
b).Owner can share the access right with other users through
the function, Buddy Share. For further information on Buddy
Share, please refer to the video:
www.youtube.com/watch?v=1N8EPiCKnOs
Cloud Service Login
a) Open EagleEyes.
b) Create an account for the EagleEyes cloud service.
Select "+", and choose
If you already have a cloud service account, please sign in.
"EaZy".
For initial use, select "Register" to create an account for the
cloud service. Fill in the information needed, and select
"Register" to continue.
This account is necessary for EaZy Networking to take effect.
Free EaZy Networking Connection
EaZy Networking is a free P2P cloud service to connect AVTECH
devices to the Internet automatically by plug-and-play, enabling
you to check the live view via your mobile device or laptop at
anytime (in 64 kbps). Should you feel the live view is not fluent
enough and would like to speed it up, AVTECH provides several
data plans for you to subscribe. We've also offered 2GB data
allowance as a gift on each device for you to experience. When
2GB is up, the network transmission speed will restore to what it
should be.
In most cases, the device is connected via P2P. Connection via
the relay server is only applied to some complex environments
such as the
private IP-based network environment
enterprise.
EaZy Networking Setup
c) Select the wired
device.
For the wired type, choose
the upper one.
Environment Checking
a) Do you use a router or wireless router to
connect to Internet?
b) You know where the router is located, and the
DHCP function of your router is on.
used by a large
d) Confirm your camera
e) Check both LED
connection.
Make sure your camera
Make sure both indicators
setup is the same as the
are always on, and select
animation shown in this
"Yes" to continue.
page, and choose "Next" to
continue.
Device Checking
a) Your camera is powered on, and connected to
the wireless router with a RJ45 network cable.
b) Check the LED status indicators, and make sure
(LAN) and
(
If
Internet) is not on, make sure the DHCP
function of your router is enabled, or refer
to Q&A section to fix your problem.
c) You have an iPhone / iPad / Android mobile
device, and it's connected to Internet by 3G
networks or wireless networks.
d) You have installed our mobile app, EagleEyes
Lite / EagleEyes Plus on your iPhone,
EagleEyesHD Lite / EagleEyesHD Plus on iPad,
or EagleEyes Lite+ / EagleEyes Plus+ on your
Android device.
If no, please download from App Store or
【Note】
Google Play. As for Android devices, Lite
doesn't support EaZy Networking.
f) Scan or Enter the
indicators.
MAC address.
To fill in MAC, which is on
the rear of the cam, you can
either type it, or tap the
code button and scan in the
address by scanning the
QR code on the back. Tap
"Apply" to continue.
585Z
(Internet) are always on.
g) Preview and name
your camera.
Check if the preview is what
you need. Then, give a
name to your camera if
needed, or simply keep the
default name, "IPCAM".
Choose "Apply" to
continue.
701_702_702a_801_EZ_setup_V1.4