Allied Telesis AT-x230-10GP 설치 매뉴얼 - 페이지 12

{카테고리_이름} Allied Telesis AT-x230-10GP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-x230-10GP 14 페이지. Rack mount installation guide

AT-x230-10GP, AT-AR3050S and AT-AR4050S Rack Mount Installation Guide

6. Aligning the devices

You can secure the devices into the tray with the truss head screws

through the holes on the slide-rail weld. You can use two truss head

screws per device. You can align up to two devices side by side in the

tray.

To align the faceplate of the device with the edge of the tray, attach



two truss head screws to one side of the device from the first and

second holes of the slide-rail weld (Figure 4).

4. A

IGURE

LIGNING THE FACEPLATE WITH THE EDGE OF THE TRAY

To align the faceplate of the device 60mm back off the edge of the



tray, attach two truss head screws to one side of the device from

the third and fourth holes on the slide-rail weld (Figure 5).