Avtech AVC484A 사용자 설명서 - 페이지 8
{카테고리_이름} Avtech AVC484A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech AVC484A 9 페이지. High resolution camera
페이지 인쇄Step5 Adjust the angle of the camera
To adjust the angle of the camera, swivel the black rotatable plate
from the center to the left or to the right, maximum 60° (Pan).
Adjust the tilt angle by moving the lens, maximum 90° (Tilt).
Use a flat-headed screwdriver to loosen the pivots on the lens.
First adjust the 1
pivot to zoom-in / out (Zoom). Second, adjust
st
the 2
pivot to fine-tune the clearness of the images.
nd
Secure these two pivots after the adjustment is completed.
Finally fasten the screw on the side of lens to fix the tilt angle
after the optimized positioning is achieved.
Note: When adjusting the title angle, please do not tilt the camera lens more than 90°.
Step5 Adjust the angle of the camera
To adjust the angle of the camera, swivel the black rotatable plate
from the center to the left or to the right, maximum 60° (Pan).
Adjust the tilt angle by moving the lens, maximum 90° (Tilt).
Use a flat-headed screwdriver to loosen the pivots on the lens.
First adjust the 1
pivot to zoom-in / out (Zoom). Second, adjust
st
the 2
pivot to fine-tune the clearness of the images.
nd
Secure these two pivots after the adjustment is completed.
Finally fasten the screw on the side of lens to fix the tilt angle
after the optimized positioning is achieved.
Note: When adjusting the title angle, please do not tilt the camera lens more than 90°.