2Wire HomePortal 5011NV 설치 매뉴얼 - 페이지 9

{카테고리_이름} 2Wire HomePortal 5011NV에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2Wire HomePortal 5011NV 18 페이지. Intelligent gateway

HomePortal® 5011NV/5012NV Intelligent Gateway Installation Guide

Figure 3: Power Connection

Note

Always use the 2Wire power adapter packaged with the gateway, as it is compliant with the local

regulatory requirements.

Connecting Your Computer to the Gateway

The first computer you connect to the gateway is used to configure the gateway for proper operation. You can

connect your gateway to additional computers and/or other devices via Ethernet cable and wireless AP.

The gateway has four Ethernet ports for connecting computers or devices to the gateway. Use the Ethernet

interface(s) on the gateway to create a home network.

To connect the computer and the gateway using the Ethernet cable:

Connect one end of the Ethernet cable (yellow-colored) to any available LOCAL ETHERNET port on the

gateway.

Connect the cable's other end to the Ethernet port of the Network Interface Card (NIC) on the

computer.

Once the gateway recognizes the computer, the relevant Ethernet LED turns steady green, and then starts

flickering once the computer starts data transfer with the gateway.

Figure 4: LAN Connection

Note

The 5012NV has one Gigabit Ethernet (GIGE) port GE/1.

Installing the HomePortal Intelligent Gateway