DGP DGP-3 사용자 설명서 - 페이지 4

{카테고리_이름} DGP DGP-3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DGP DGP-3 13 페이지. Tungsten grinder
DGP DGP-3에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)

페이지 인쇄

2. SPECIFICATIONS

Motor:

1/3HP, 3450 RPM, 5.0 amps, 115/230 VAC, 50/60 Hz or 220 VAC, 50 Hz

with step-down trasnformer option

Wheels:

Right side:

Nickel Plated Diamond Wheel, 100% concentration, 6" diameter, .1535 face, 1.00" bore

Left side:

Diamond Cutting Wheel, 6" diameter

Weight:

DGP-3: 27.2 lbs. / 12.3 kg

DGP-3-V2: 102 lbs. / 46.4 kg

3. UNPACKING

Check for shipping damage. Diamond Ground Products takes great pride in producing quality equipment. If for some

reason you find anything to be defective, please call us at: (805) 498-3837 and we will work with you to solve the

problem. The following accessories are shipped with the DGP-3 and DGP-3-V2 grinders:

1. Pin Vise used to hold tungsten while grinding

2. Six different Hex Keys, used to make various adjustements, and one Hex Screwdriver, used to secure the tungsten

in the cutting apparatus.

3. Collets (two of your choice) - used to guide the tungsten and hold it at the proper angle while grinding.

4. Scale Setting Rod and Block - used to calibrate the angle positioner from time to time as the wheel becomes worn.

4. WARRANTY

The DGP-3 & DGP-3-V2 come with a one-year warranty on parts and labor, excluding wheels that are a consumable part

that naturally wears over time. This warranty excludes abuse to the machine, dropping of the unit or improper handling

by the operator.

5. SAFETY AND OPERATING GUIDELINES

Before any work is done, read the caution below carefully. Working safely prevents accidents.

• When not in use, turn the grinder off for safety purposes and to decrease wear on the machine.

• Wear proper apparel. Do not wear loose clothing, including gloves, neckties, rings, bracelets, or other jewelry, which

may get caught in moving parts of the machine.

• Wear protective hair covering to contain long hair.

• Wear safety glasses and a facemask.

• Never operate power tools when tired, intoxicated, or when taking medication that may cause drowsiness.

• Work area should have sufficient lighting.

• A proper electrical outlet should be available for the tools. A three-prong plug should be plugged directly into a

three-pronged outlet. Extension cord should be the correct gauge.

• Keep visitors at a safe distance from the work area.

• Always unplug grinder prior to inspection.

• Read this manual thoroughly for specific adjustments and operating procedures.

• Do not perform "make-shift" repairs. Any part that is damaged should be promptly replaced.

• Only use the grinder for its intended purpose. Do not use it for a job it was not designed for.

• Make sure that the griner is off before plugging it in.

• Do not apply extreme force on the tungsten while grinding. This may cause your grinder to jam or cause premature

grinding wheel wear.

• Never leave the grinder unattended. Turn the grinder off first and do not leave it until it comes to a complete stop.

• Keep hands away from moving parts.

• Know your grinder; learn its operation, applications, and specific limitations.

• Always unplug grinder prior to inspection.

DGP-3 & DGP-3-V2 User Manual

Rev:B • 05/16/2023