Allied Telesis SwitchBlade AT-AR440S 설정 매뉴얼 - 페이지 3
{카테고리_이름} Allied Telesis SwitchBlade AT-AR440S에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis SwitchBlade AT-AR440S 11 페이지. For typical network scenarios
Allied Telesis SwitchBlade AT-AR440S에 대해서도 마찬가지입니다: 데이터시트 (1 페이지), 데이터시트 (5 페이지), 데이터시트 (3 페이지), 데이터시트 (3 페이지), 데이터시트 (2 페이지), 브로셔 (6 페이지)
페이지 인쇄
Determining your ADSL connection parameters
The table below is provided for you to fill in the connection parameters for your ADSL Service
Provider and ISP. Typically, the provider will specify the parameters on the printed material that they
give you when you sign up for their service. But if you have not been given any such material, you
should contact your providers technical support help desks or Websites to determine their
requirements.
Table 1: ADSL technical requirements
Connection Parameters
Encapsulation
VPI
VCI
Connection type
(e.g. PPPoE0A, PPPoA or RFC 1483 routed)
Authentication
Login name and password
(if applicable)
Your static public IP address
(if applicable, otherwise you will have a
dynamically assigned address)
DNS Server IP addresses
(Some ISP's use PPP dynamic assignment to
automatically assign these addresses)
Note: Your router also has the typical connection settings for different countries pre-defined.
You can try setting the country using the router's Graphical User Interface (GUI), and then
verify if the ATM settings are correct for your service provider. If not, then the connection
settings can still be altered through the GUI. Details on using the GUI are shown later in this
document.
Set up your AT-AR440S ADSL Router for Typical Network Scenarios
AT -AR440S Default Values
(for country=none)
llc
0
35
PPPoA
Required values for your
ADSL Service provider
Primary server
Secondary server
3